Industrial ceiling fan size selection

The size of industrial ceiling fans is determined based on the diameter of the fan blades and is used in industrial ceiling fans in tall spaces.
There are various fan sizes. What diameter of ceiling fan should be chosen for different occasions?

Industrial large ceiling fans are available in more than ten different lengths from 7.3 meters to 2.5 meters in diameter and are commonly used in the market.
The standard diameters are 7.3 meters, 6.1 meters, 4.9 meters, 4.3 meters, 3.6 meters, 2.5 meters, etc., and of course.There are other non-standard customized sizes.
The size of industrial large ceiling fans needs to be selected based on the height of the installation point. According to the industrial large ceiling fan characteristics, first of all, the longer the diameter of the fan blade, the wider the range it covers; but the longer the fan blade, the faster the speed.The slower it blows, the shorter the distance it blows, so the higher the mounting point the smaller the fan should be. also because the air flow blown by the fan needs to reach a certain distance before it can be dispersed and reach the maximum coverage, so there are also requirements for the minimum installation points of ceiling fans of different diameters. In addition to the need to consider industrial
The airflow effect of the ceiling fan should also consider the workers below. If the ceiling fan is installed at a too low installation point,If it is too large, workers will feel depressed.

Therefore, the size selection of industrial large ceiling fans needs to be comprehensive consider the above factors.
The following is a more practical solution that balances various installation factors and combines the length of the extension rod.

Size selection criteria for industrial large ceiling fans: